Products

CAPAC® / FFT / SRL - Solutions

The basic system consists of a MR measuring tube and an electronic unit in water resistant compact housing, protected as per IP 65. The compact box offers the user all modern data ports for connection to processors and display systems from ZUMBACH® or to host computers and to local area networks.

Measuring Tubes

All measuring tubes are available with active electrode length of 10 mm (.39 in) or 50 mm (1.97 in).

Ultra Short Tubes (specially for FFT analysis and SRL prediction)

Solution

MR12.10HS

MR36.10HS

MR68.10HS

Diámetro máx. cable

8 mm (.31 in)

24 mm (.94 in)

45 mm (1.8 in)

Longitud de medición

10 mm (.394 in.)

10 mm (.394 in.)

10 mm (.394 in.)

Standard Tubes

Solution

MR12.10HS

MR20.50HS

MR36.10HS

MR68.10HS

Max. Cable Diameter

8 mm (.31 in)

13 mm (.52 in)

24 mm (.94 in)

45 mm (1.8 in)

Electrode Lengths

50 mm (1.97 in.)

50 mm (1.97 in.)

50 mm (1.97 in.)

50 mm (1.97 in.)

Electronic Units

 

Measuring Tube

Electrode Length

Band Width Adjustable

CAPAC® HS ... PA / PI

HS (passive)

10 or 50 mm (.39 or 1.97 in.)

1... 600 Hz

FFT Master

(In-Line FFT Analysis / SRL – Prediction of Structural Return Loss)

This tool allows the prediction of structural return loss during manufacturing of the product. All standard systems are equipped with a very fast analog output, making short capacitance variations available. This signal is fed into a processor for FFT analysis and the change in cable impedance is displayed on the screen in real time.

Data Cable Category 5,6...8: up to 1200 MHz at 2500 m/min (8200 ft./min)

Coax, CATV Cable: up to 6 GHz at 500 m/min (1640 ft./min)