Products

RAYEX® - Solutions

RAYEX® on CV Lines

Specific RAYEX® versions are available for use on CCV and VCV lines operated with nitrogen and/or steam. Conductor diameter and ovality can be measured in addition by placing and ODAC® laser measuring head in front of the extruder.

Depending on product and quality strategy, a RAYEX® system can be complemented with the following instruments to be installed at the end of the line:

  • Additional RAYEX® with "hot-cold" function for automatic shrinkage compensation and monitoring of the droop effect.
  • Diameter measuring head ODAC®. Special software allows automatic shrinkage compensation and diameter control
  • Surface inspection system SIMAC®

RAYEX® in Silane Extrusion

Even medium voltage cable, single or multi-layer, manufactured with Silane, Sioplast or similar processes, can be measured directly at the extruder very accurately.

RAYEX® in Pipe Extrusion

For foamed, multi-layer pipe and other products, where conventional ultrasonic methods are not applicable. In addition to wall thickness, diameter and ovality values, the degree of blow is displayed continuously.

Process / Product: CCV / VCV

RAYEX® Model: 160

Max Diameter: 110mm (4.33 in.)

Max Wall Thickness: 40mm (1.57 in.)

Process / Product: MV and HV Cable

RAYEX® Model: 220

Max Diameter: 160mm (6.30 in.)

Max Wall Thickness: 40mm (1.57 in.)

Process / Product: Silane, Monosil

RAYEX® Model: 160S

Max Diameter: 80mm (3.15 in.)

Max Wall Thickness: 20mm (.79 in.)

Process / Product: MV Cable

RAYEX® Model: 160S

Max Diameter: 80mm (3.15 in.)

Max Wall Thickness: 20mm (.79 in.)

Process / Product: COAX Specialty Cable

RAYEX® Model: 160S

Max Diameter: 80mm (3.15 in.)

Max Wall Thickness: 20mm (.79 in.)

Process / Product: Foam Core Pipe

RAYEX® Model: 160P

Max Diameter: 110mm (4.33 in.)

Max Wall Thickness: 20mm (.79 in.)

Process / Product: Specialty Pipe

RAYEX® Model: 220P

Max Diameter: 160mm (6.30 in.)

Max Wall Thickness: 30mm (1.18 in.)