Automatic Off-line Measuring Station for the Outside Diameter and Ovality Measurement of Wire, Cable or Tube Samples.
The QC 2 system consists of a high precision diameter measuring head, a motorized rotating sample holder with automatic sample ejection and a processor unit USYS 20 with special software evaluating the captured values. The system provides fast and accurate measurements of manufactured parts or cut samples. QC 2 can be used either in quality control (QC) laboratories or on factory floors. It provides operators a simple and repeatable solution for parts measurement and immediate notification of meeting specification within given tolerances. Unlike other micrometers or mechanical indicators that can give errors due to poor zero setting, end play, calibration or are sensitive to user input, QC 2 provides repetabale measurements regardless the operator.
QC 2 Advantages and Benefits:
Accurate and easy to use measurement method
Quick feedback for production optimisation
Quick sample positionning thanks to the special designed rotating holder
Automatic rotation and measurement start by single key press
Automatic sample ejection for products up to 5 mm (.2 in.); manual removal for sample up to 18 mm (.7 in.)
The operator is free to make as many measurements around the circumference of the sample as desired. Simple statistics of the resultant values will be computed
By simply pressing one key the min., max., average and standard deviation of the samples measurements are calculated and are available to printout
The calculated values can be uploaded to a host computer for further processing
ODAC® - QC 4
Off-line Measuring Station for the Outside Diameter Measurement and Calculation of Inside Diameter and Wall Thickness of Hose and Tube Samples.
The QC 4 system consists of a high precision diameter measuring head combined with a processor unit USYS 20 with special software evaluating the measured values. The system provides fast and accurate measurements of manufactured parts or cut samples of extruded products. QC 4 can be used either in quality control (QC) laboratories or on plant floors. It provides operators a simple and repeatable solution for measuring parts and immediate notification of meeting specification within the given tolerances.
Accurate and User Friendly Method of Measurement:
The sample to be tested is placed on a reference pin
The operator is free to make as many measurements around the circumference of the sample as desired
2 types of statistics:
1 measurement over several samples
Several measurements over 1 sample
By simply pressing one key the min., max., average and standard deviation of the sample measurements are calculated and are available to printout
The calculated values can be uploaded to a host computer for further processing